Shotblasting Ireland
Nationwide shotblasting and shot blasting services for steel, concrete, stone and plant — mobile crews from Co. Wexford.
Rayco Shotblasting are shotblasting contractors operating nationwide from our base at Monamolin, Co. Wexford. Shotblasting (also written shot blasting) propels steel shot, grit or a non-silica abrasive at the surface under high pressure to strip rust, mill scale, paint, coatings, laitance, algae and contamination back to sound substrate, leaving the anchor profile that primers, resins and protective coatings need to bond. We blast structural and fabricated steel to ISO 8501-1 grades Sa 2, Sa 2½ and Sa 3, prepare concrete floors and decks to CSP 3–5, and clean stone, brick and rendered façades using controlled low-pressure and wet blasting. Every mobilisation travels with our own compressors, blast pots, abrasive, dust containment and welfare, and works are delivered under ISO 9001 and ISO 14001 systems with RAMS issued before we arrive.
Whether it's rust removal, paint and coating removal, steel preparation or restoring old metal, send us a few photos and details of your job and we'll assess it and send you a quotation.
Shot Blasting Services
Shot blasting works differently: a spinning wheel throws steel shot at the surface inside a closed unit, and the shot is vacuumed up and reused. Because there is no open nozzle, it is fast and largely dust-free on big, flat areas.
It is the usual choice for concrete floors before resin or epoxy, and for steel plate and sections. Where a shape is too complex for a machine, we switch to air blasting — we pick whichever suits your job.
Sandblasting Services
Sandblasting — properly called abrasive or air blasting — uses compressed air to drive abrasive through a nozzle at the surface. The operator controls the angle and distance, so it reaches into corners, welds, chassis rails, gate scrolls and machinery that a machine can't.
It is used to remove rust, mill scale, old paint and coatings from steel and metal, and to clean brick and stone. A blasted surface gives new primer or paint something to grip, which is why coatings last longer on properly prepared metal.
What Can We Sandblast & Shot Blast?
Steel & Metal
Plate, sections, tanks and fabrications stripped back to bare metal.
Structural Steel
Beams, columns and frames prepared for primers, paint or fire protection.
More on structural steelMachinery & Plant
Construction plant, buckets, booms and industrial machinery.
More on machinery & plantAgricultural Equipment
Tractors parts, trailers, attachments and farm steelwork.
More on agricultural equipmentVehicle & 4x4 Chassis
Car, jeep, pickup and commercial chassis blasted to bare steel.
More on vehicle & 4x4 chassisGates & Railings
Old paint and rust lifted from domestic and commercial gates and railings.
Concrete, Brick & Stone
Floors, facades and masonry cleaned or profiled.
More on concrete, brick & stoneRust Removal & Surface Preparation
Blasting is the most thorough way to remove rust from steel and metal. It takes corrosion out of pits and seams that wire brushes and grinders miss, leaving clean metal ready for primer or a protective coating. See our rust removal and surface preparation pages.
Blasting does not repair metal that has rusted through or lost strength. If we find severe corrosion, we'll tell you so it can be assessed or repaired.
Paint & Coating Removal
We strip old paint and failed coatings from steel, concrete, brick and stone, leaving the surface underneath ready for its next finish. Not every coating or material suits blasting — send us a photo and we'll tell you what will work. More on paint removal.
Industrial Sandblasting & Shot Blasting
We work for engineering firms, steel fabricators, construction companies, factories, manufacturers, plant operators and farms — preparing structural steel, fabricated parts, machinery and industrial equipment, and carrying out restoration work.
We hold ISO 9001, ISO 14001 and Safe-T-Cert. See industrial sandblasting and industrial shot blasting.
Vehicle & Chassis Sandblasting
Chassis for 4x4s, pickups, classic and commercial vehicles, plus trailers and restoration projects, blasted to bare steel ready for anti-corrosion coating. Some parts must be removed or masked, and thin panels may not suit blasting — we'll advise from your photos. Chassis blasting.
Machinery & Agricultural Equipment
Farm machinery, plant, construction equipment, trailers and attachments stripped of rust and old paint before repainting. Agricultural machinery · plant machinery.
See the Difference
Real jobs from our own crews. View all projects.
Before
After
Before
AfterOur Process
1. Send us your project
Photos, rough dimensions and what you need done.
2. We assess the job
We look at the material, condition and work involved.
3. Quotation
You get a quote based on your actual job.
4. Blasting
At our Wexford yard or on your site.
5. Final inspection
The finished surface is checked before handover.
How Much Does Sandblasting Cost?
Every job is priced individually — we don't publish fixed prices because two jobs of the same size can need very different work. The price depends on:
- Size and surface area
- Material
- Condition and corrosion
- Existing paint or coatings
- Preparation and masking
- Complexity and access
- Quantity
- Required finish
Why Choose Rayco
Commercial & private work
From a single gate or chassis to industrial steelwork.
Yard or on-site
Bring it to us in Wexford, or our mobile crews come to you.
Accredited
ISO 9001, ISO 14001 and Safe-T-Cert.
Proper assessment
We look at your job before quoting.
Real results
Genuine before and after photos of our own work.
Easy quotes
Send photos online, call, or email.
Where We Work
We are based at Unit 2 Cullentra Lane, Cullentra, Monamolin, Co. Wexford, Y25 V8F2. Smaller items can be brought to our yard, and our mobile crews travel nationwide for on-site work on structures, floors, machinery and anything that can't be moved. Searching for sandblasting near me or shot blasting near me? See your county below.
Key Benefits
Frequently Asked Questions
What is shotblasting?
Shotblasting is abrasive blast cleaning using steel shot, grit or another graded abrasive driven at the surface under compressed air. It removes rust, mill scale, paint and contamination and leaves a clean, keyed profile ready for coating.
How much does shotblasting cost in Ireland?
Cost depends on area, substrate, coating thickness, access and the blast grade specified. Smaller items and one-day jobs are usually day-rated; larger contracts are priced per square metre. We survey free of charge and issue a fixed written quote.
Do you travel nationwide?
Yes. We are fully mobile and work across all 32 counties — Dublin, Cork, Galway, Limerick, Waterford, Kilkenny, Wexford and everywhere between — bringing our own compressors, blast pots, media and containment.
What is the difference between shotblasting and sandblasting?
Shotblasting specifically uses steel shot or grit, usually within a recovery system, while sandblasting is the general term for air-driven abrasive blasting. We deliver both and choose whichever suits the substrate and specification.
What surfaces can you shotblast?
Structural and fabricated steel, tanks, pipework, plant and machinery, agricultural equipment, concrete floors and slabs, stone, brick, render and masonry.
Are you insured and accredited?
Yes — ISO 9001, ISO 14001, Safe-T-Cert and CIRI registered, with full public and employers liability insurance and RAMS supplied before every mobilisation.
What is the difference between sandblasting and shot blasting?
Sandblasting (air abrasive blasting) uses compressed air to drive a mineral or grit abrasive through a hand-held nozzle, which suits complex shapes, chassis, gates, machinery and masonry. Shot blasting throws steel shot at the surface from a spinning wheel inside a closed unit, which suits large flat areas such as concrete floors and steel plate. We recommend the process after seeing the job.
Can blasting remove rust?
Yes. Abrasive blasting removes surface rust, scale and corrosion back to sound metal so it can be primed or coated. It does not repair metal that has lost thickness or strength — if we uncover severe corrosion we will tell you, as repair may be needed first.
Can you sandblast a vehicle chassis?
Yes. We blast car, 4x4, pickup, commercial vehicle and trailer chassis. Parts like rubber, glass, bearings and wiring must be removed or masked first, and some thin panels are not suitable for aggressive blasting — send photos and we will advise.
How much does sandblasting cost in Ireland?
There is no fixed price. Cost depends on size, material, condition, how much rust or paint is present, access, quantity and the finish you need. Send us photos and rough dimensions and we will give you a quotation for your job.
Do I come to you or do you come to me?
Both. Items can be brought to our yard in Monamolin, Co. Wexford, or our mobile crews can blast on your site anywhere in Ireland when the item or structure cannot be moved.
How long does a blasting job take?
It depends entirely on the size and condition of the job. We will give you a realistic timeframe with your quotation.
Shotblasting by County
Related Services
Get a Free Site Assessment
Contact our team today for a no-obligation quote.